BSVNF - ROSTRIP METAL STRIPPING SALTS M 20
- MSDS: BSVNF
- Manufacturer: MCGEAN ROHCO INC
- Product Name: ROSTRIP METAL STRIPPING SALTS M 20
- National Stock Number: 6850-00N049138
Product Identification
Product ID:ROSTRIP METAL STRIPPING SALTS M 20
MSDS Date:06/18/1985
FSC:6850
NIIN:00N049138
MSDS Number: BSVNF
Responsible Party
CLEVELAND, OH 44113
US
Emergency Phone: 313-872-1800;800-424-9300(CHEMTREC)
Info Phone: 216-621-6425
Cage: 87097
Contractor
Cage: 87097
Ingredients
THIOCYANIC ACID, AMMONIUM SALT; (AMMONIUM THIOCYANATE)
CAS: 1762-95-4
RTECS: XK7875000
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:AMMONIUM THIOCYANATE IS LOW TOXICITY
BUT PROLONGED EXPOSURE MAY CAUSE SKIN IRRITATION, NAUSEA OR NERVOUS
SYSTEM DISORDER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: WASH WITH WATER FOR AT
LEAST 15 MIN AND GET MEDICAL ATTENTION. INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP). INGEST: GET MD IMMEDIATEL Y
.
Fire Fighting
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTIBLE SOLID.
Accidental Release
Spill Release Procedures:COVER WITH REDUCER SUCH AS FERROUS SULFITE, OR
SODIUM BISULFITE, MIX WELL BY SPRAYING WATER. ADDITION OF SULFURIC
ACID 3M MAY BE REQUIRED TO PROMOTE REDUCTION. ADD SODA ASH AND
TRANSFER TO CONTAINER.
Neutralizing Agent:SEE WASTE DISPOSAL.
Handling
Handling and Storage Precautions:KEEP DRY. STORE AWAY FROM REDUCING
AGENTS OR STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL-NORMAL RATE.
Protective Gloves:NEOPRENE.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
pH:NEUT
Appearance and Odor:WHITE POWDER; MILD ODOR.
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS OR FLAMES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NO*X FUMES ON COMBUSTION, SULFUR
DIOXIDE.
Disposal
Waste Disposal Methods:TREAT BY WATER DILUTION AND REDUCTION AS ABOVE.
ADD SODA ASH AND THEN ADD DILUTE HYDROCHLORIC ACID UNTIL NEUTRAL.
SEND TO CHEMICAL SEWER AND DILUTE WITH WATER. DISPOSER MUST COMPLY
WITH FEDERAL, STATE AND LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.